Lab Q

ASTM Type I: Lab-Q Ultra

ASTM Type I: Lab-Q Ultra


A multipurpose water maker

Lab-Q water maker produces Type I ultrapure water and Type II pure water simultaneously. The produced water has very low total organic carbon (TOC) content, meeting the requirements of liquid chromatography and all spectroscopy methods, besides microbiological and molecular biology application. It also meets ISO 3696, Type I Standards. Dispensing of ultrapure water is configured on the front panel whereas pre water is dispensed from the storage tank. For feed water with higher level of TDS i.e. > 500 ppm a customised pre treatment module can be designed prior to INDION Lab-Q Ultra.

  • Features
  • Online resistivity meter- displays product water quality for continuous monitoring
  • Automatic flush device (AFD) – ensures periodical cleaning of the filter system
  • Integrated recirculation system – ensures consistent quality of water and reduces TOC to low levels (2-5 ppb)
  • Dry run protection – ensures protection of the pump when the inlet water is unavailable
  • Optional point-of-user filter – ensure compliance to microbial reduction values
  • Optional flexible dispensing – remote water dispenser offers dispensing at various angles and heights
  • Electrolytic auto sanitizer – ensures periodic sanitization of upstream purifying filters
  • High purity storage tank – a built-in UV, protective air filter and high grade tank material ensures sustained purity while in storage
  • Advantages
  • Works on potable water as the feed
  • Compact and portable counter to model
  • Low operating cost which required minimum maintenance
  • Applications
  • Gas Chromatography
  • All spectroscopy methods
  • Enzyme immunoassays
  • HPLC (High performance liquid chromatography )
  • ICP (Inductively coupled plasma)
  • AAS (Atomic absorption spectrophotometer)
  • Clinical research
  • Inorganic trace analysis
  • Buffer and media preparation
  • Molecular biology
  • Microbiological techniques

Feed Water Specifications

Configuration10 LPH
TDS500 ppm (max)
Fe, MnNil
Free ChlorineNil
Silica< 20 ppm
Inlet PressureMin 0.5 kg/cm² & Max 2.0 kg/cm²

Product Specifications

Configuration10 LPH
Dimensions W x D x H (in mm)450 x 250 x 500
Storage Tank Dimensions W x D x H (in mm)300 x 250 x 500
Weight13 kgs
Power Requirement230 V AC ± 10%
Power Consumption80 Watts

Product Water Specifications

 ASTM Type 2 WaterASTM Type 1 Water
Flow rate10 LPH1 – 1.5 l/min
Conductivity<0.1 μS/cm0.054 μS/cm
Resistivity10 MΩ.cm18.2 MΩ.cm
Total Organic Carbon (TOC)<30 ppb<5 ppb*
Endotoxin LevelNA<0.25 Eu/ml
Particle > 0.22 μmNA< 1 per ml

Note: * Performance parameters achieved when water dispensed through final point of use 0.22 μ

* TOC values achieved with feed water of less than 50 ppb